Draughtsman Civil

SR NO NAME OF THE TOOLS & EQUIPMENT AS PER THE SYLLABUS NO.REQD.FOR INSTR.& TRAINEES FOR ONE UNIT AS PER DGET NORMS.
1 BOX DRAWING INSTRUMENT CONTAINING ONE 15 CM COMPASS WITH PIN POINT,
PIN POINT & LENGTHENING BAR, ONE PAIR SPRING BOWS, ROTATING COMPASS
WITH INTERCHANGEABLE INK AND PENCIL POINTS, DRAWING PENS WITH PLAIN
POINT & CROSS POINT, SCREW DRIVER AND BOX OF LEDS.
16
2 PROTRACTOR CELLULOID 15 CM SEMI-CIRCULAR 16
3 SCALE CARD BOARD-METRIC SET OF EIGHT A TO H IN A BOX
1:1,1:2,1:2:5,1:5,1:10,1:20,1:50,1:100,1:200,1:500,1:1000,1:2000,
1:1250,1:6000,1:38 1/3,1:66 2/3.
16 SETS
4 SCALE – METRIC AND SECTION WOODEN 30 CM LONG MARKED WITH EIGHT SCALE –
1:1,1:2,1:2:5,1:10,1:20,1:50,1:100,1:5
16 SETS
5 SCALES PLOTTING BOX WOOD 6 METRIC SCALES 30 CM LONG WITH OFF SET SCALES 16 SETS
6 SET SQUARES TRANSPARENT 2 MM THICK WITH BEVELLED EDGES 45 DEGREES 20CM. 16 SETS
7 SET SQUARE CELLULOID 2 MM THICK WITH BEVELLED EDGE 60 DEGREES 25 CM. 16
8 BOARD DRAWING 1250 MM X 900 MM. 16
9 SQUARE T 1250 MM 16
10 ERASING SHIELD SMALL SIZE. 16
11 TEMPLATE – ARCHITECTS AND BUILDERS. 16
12 GENERAL OUTFIT
1 GEOMETRICAL MODELS (WOODEN) AS PER GIVEN BELOW
(1) CUBE 08 MM SIDES
(2) RECTANGULAR PARALLEL PIPED 8 CM X 15 CM
(3) SPHERE 8 CM DIA.
(4) LIGHT CIRCULAR CORE 8 CM DIA BASE 15 CM VERTICAL HEIGHT.
(5) SQUARE PYRAMID 8 CM SIDE BASE AND 15 CM VERTICAL HEIGHT.
(6) CYLINDER 8 CM DIA. 15 CM HEIGHT.
(7) PRISMS TRIANGULAR 8 CM SIDES TRIANGLE AND 15 CM LENGTH.
(8) PRISM HEXAGONAL 8 CM SIDES HEXAGON AND 15 CM LENGTH.
2 FRENCH CURVES-TRANSPARENT PLASTIC SET OF 12. 4
3 FLEXIBLE CURVES 80 CM LONG. 8
4 ELLIPTICTRAMMEL WITH INK AND PENCIL FOR NOT LESS THAN 10 CM MINOR AXES
COMPLETE IN A CASE.
1
5 RADIUS CURVE METRIC-3 MM 15 MM. 4
6 CLINOGRAPH WOODEN 18 CM. 1
7 DRAFTING MACHINES- VERTICAL TYPE COMPLETES WITH DRAWING BOARD
ADJUSTABLE TABLE AND PAIR OF METRIC SCALES 30 CM AND 40 CM LONG.
4
8 DRAFTING MACHINES-HORIZONTAL TYPE COMPLETE WITH DRAWING BOARD SIZE
ADJUSTABLE TABLE WITH PAIR OF METRIC SCALES 30 CMS AND 40 CMS.
4
9 BRASS PARALLEL RULER IN A CASE 4
10 CALCULATOR (POCKET SIZE) 1 (FX) 4
11 PLANIMETER SLIDING BAR PATTERN 70 CM COMPLETE IN CASE WITH MAGNIFIER
AND INSTRUCTIONS READING IN METRIC UNITS.
1
12 PENTAGRAPH-BRASS-COMPLETE IN WOODEN CASE WITH ACCESSORIES 60 CMS. 1
13 BEAM COMPASS WITH FINE ADJUSTMENTS WITH INK AND PENCIL POINTS AND TWO
CHROMIUM PLATED WEIGHTS 30 CM IN WOODEN CASE.
2
14 PROPORTIONAL DIVIDERS 15 CM. 4
15 LERROY PRINTING SET. 2
16 TRACING TABLE WITH PLATE GLASS 1250 X 900 CMS. 1
17 PRINTING FRAME 45 CM X 60 CM & 80 CM X 60 CM 1
18 WEIGHTING TRIANGLE WITH TAPE 1250 X 900 CMS. 1
19 AMMONIA BOX 120 CM X 35 X 35 CMS. 1
20

2 SETS
21 TABLE DRAFTING FOR BOARDS 2 SETS
22 STOOLS DRAUGHTSMAN HIGH 2 SETS
23 TABLE WORKING BLUE PRINTING 2 M X 10 M. 2
24 PC-AT FOR AUTO CAD WITH PLOTTER & DOT-MATRIX PRINTER. 2 NOS
25 ALMIRAH STEEL (MAJOR) 2
26 INTERLOCK, INTERCHANGEBLE BRASS STENCILS WITH BRUSH IN A BOX. 4
27 PASTLE AND MORTAR-PORCELAIN 3 MM,6 MM, 12MM, 18MM. 2
28 PRINT TRIMMER CUTTING EDGE 100 CM. 1
29 CHEST OF DRAWERS 8 DRAWERS (STANDARD). 4
30 DRAUGHTSMAN TABLE. 16
31 DRAUGHTSMAN STOOL. 16
32 INSTRUCTOR’S TABLE (BIG SIZE, FULL SECRETARIATE) 1
33 INSTRUCTOR CHAIR. 2
SURVEY INSTRUMENTS
1 LAND MEASURING CHAIN 30 METRES WITH 10 ARMS. 4
2 STEEL TAPE 20 METRES LONG IN A LEATHER CASE. 2
3 RANGING RODS WOODEN FITTED WITH IRON SHOE 2 METERS LONG. 16
4 OPTICAL SQUARE PWD PATTERN 4
5 OPTICAL SQUARE BOX TYPE CIRCULAR. 1
6 DUMPY LEVEL-BUILDER 25 CM LOCAL LENGTH X 23 MM COMPLETE WITH BOX AND
ACCESSORIES AND STAND.
2
7 LEVELLING STAFF 4 METERS READING TO 5 MM. 1 TELESCOPIC
8 PLAIN TABLE WITH STAND 2 ST.PIECE
9 ALIDEDE 2
10 THROUGH COMPASS.
LIST OF TOOLS FOR ALLIED TRADE TRAINING IN CONSTRUCTION WORKS ETC.
1 SHOVEL 2
2 PAN M.S. 25 CMS DIA. 6
3 FARMA WOODEN FOR MEASURING AGGREGATES 1
4 BUCKET G.I. 35 CM DIA. 4
5 MASON’S PLUMB RULE WITH SPIRIT LEVEL 4
6 MASON’S SQUARE 30 CM X 30 CM. 4
7 SIEVE FOR SAND 1 MM/100 X 60 CM 1
8 TROWEL 25 CM X 10 CM. 4
9 SIEVE FOR SAND 22 MM/100 X 60 CMS. 1
10 TOOLS CAULKING SET CB 6 2 SETS
11 BRICK HAMMER WITH HANDLE 4
12 RULE 4 FOLD WOODEN 60 CMS. 4
13 6” PAINTING TROWEL 4
14 LINE PINS CORNER BLOCK 4 PAIR EACH
15 MOTOR BOARD 4
16 WIRE BRUSH 4
17 WOODEN FLOAT 4
18 STEEL FLOAT 4
19 SPIRIT LEVEL 30 CMS. 4
20 CHISEL 5 CM HAMMER HEADED 4
21 BOLSTER 4
22 CLAW HAMMER 4
23 SPADE 4
24 MEASURING TAPE STEEL 30 METERS. 4
25 LADDER ALUMINIUM 3 METERS. 4
26 PICKAXE 2
27 HAMMER 250 GMS. 1
28 CROW BAR 3 CM DIA. 1.5.LAG 2
29 HANDS HAMMER 1 KG. 2
30 BINACULARS 2
31 SURVEYOR’S UMBRELLA 2 NOS